source: mod_gnutls/doc/mod_gnutls_manual.mdwn @ d26fa55

debian/masterdebian/stretch-backportsupstream
Last change on this file since d26fa55 was df49a2d, checked in by Thomas Klute <thomas2.klute@…>, 4 years ago

Handbook: Sort options into subsections

  • Property mode set to 100644
File size: 25.4 KB
RevLine 
[e7527b9]1% `mod_gnutls` Manual
[4ee45a1]2
3* * * * *
4
[bce7907]5`mod_gnutls` is a module for the Apache web server that provides HTTPS
6(HTTP over Transport Layer Security (TLS) or the older Secure Sockets
7Layer (SSL)) using the GnuTLS library.  More information about the
8module can be found at [the project's website](https://mod.gnutls.org/).
[4ee45a1]9
10* * * * *
11
12Compilation & Installation
[2b16350]13==========================
[4ee45a1]14
[e7527b9]15`mod_gnutls` uses the `./configure && make && make install` mechanism
16common to many Open Source programs.  Most of the dirty work is
17handled by either `./configure` or Apache's `apxs` utility. If you have
18built Apache modules before, there shouldn't be any surprises for you.
19
20The interesting options you can pass to configure are:
21
22`--with-apxs=PATH`
23:   This option is used to specify the location of the apxs utility that
24    was installed as part of apache. Specify the location of the
25    binary, not the directory it is located in.
26
[dc058b8]27`--with-apu-config=PATH`
28:   Path to APR Utility Library config tool (`apu-1-config`)
[e7527b9]29
30`--help`
31:   Provides a list of all available configure options.
[4ee45a1]32
[dff57b4]33It is recommended to run `make check` before installation. If your
34system doesn't have a loopback device with IPv6 and IPv4 support or
35`localhost` does not resolve to at least one of `[::1]` and
36`127.0.0.1`, you may have to set the `TEST_HOST` or `TEST_IP`
[dc058b8]37environment variables when running `./configure` to make the test
38suite work correctly.
39
[4ee45a1]40* * * * *
41
42Integration
[2b16350]43===========
[4ee45a1]44
[2b16350]45To activate `mod_gnutls` just add the following line to your httpd.conf
[4ee45a1]46and restart Apache:
47
[2b16350]48    LoadModule gnutls_module modules/mod_gnutls.so
[4ee45a1]49
50* * * * *
51
[2b16350]52Configuration Directives
53========================
[4ee45a1]54
[df49a2d]55General Options
56---------------
57
58### GnuTLSEnable
[4ee45a1]59
[2b16350]60Enable GnuTLS for this virtual host
[4ee45a1]61
[2b16350]62    GnuTLSEnable [on|off]
[4ee45a1]63
[2b16350]64Default: *off*\
65Context: virtual host
[4ee45a1]66
[2b16350]67This directive enables SSL/TLS Encryption for a Virtual Host.
[4ee45a1]68
[df49a2d]69### GnuTLSCache
[4ee45a1]70
[743e31f]71Configure TLS Session Cache
[4ee45a1]72
[2b16350]73    GnuTLSCache [dbm|gdbm|memcache|none] [PATH|SERVERLIST|-]
[4ee45a1]74
[2b16350]75Default: `GnuTLSCache none`\
76Context: server config
[4ee45a1]77
[743e31f]78This directive configures the TLS Session Cache for `mod_gnutls`.
[c005645]79This could be shared between machines of different architectures. If a
80DBM cache is used, access is serialized using the `gnutls-cache`
81mutex.
[4ee45a1]82
[2b16350]83`dbm` (Requires Berkeley DBM)
[743e31f]84:   Uses the default Berkeley DB backend of APR DBM to cache TLS
[2b16350]85    Sessions results.  The argument is a relative or absolute path to
86    be used as the DBM Cache file. This is compatible with most
87    operating systems, but needs the Apache Runtime to be compiled
88    with Berkeley DBM support.
[4ee45a1]89
[2b16350]90`gdbm`
[743e31f]91:   Uses the GDBM backend of APR DBM to cache TLS Sessions results.
[4ee45a1]92
[2b16350]93    The argument is a relative or absolute path to be used as the DBM Cache
94    file.  This is the recommended option.
[4ee45a1]95
[2b16350]96`memcache`
[743e31f]97:   Uses a memcached server to cache the TLS Session.
[4ee45a1]98
[2b16350]99    The argument is a space separated list of servers. If no port
100    number is supplied, the default of 11211 is used.  This can be
101    used to share a session cache between all servers in a cluster.
[4ee45a1]102
[2b16350]103`none`
[743e31f]104:   Turns off all caching of TLS Sessions.
[4ee45a1]105
[2b16350]106    This can significantly reduce the performance of `mod_gnutls` since
107    even followup connections by a client must renegotiate parameters
108    instead of reusing old ones.  This is the default, since it
109    requires no configuration.
[4ee45a1]110
[df49a2d]111### GnuTLSCacheTimeout
[4ee45a1]112
[743e31f]113Timeout for TLS Session Cache expiration
[4ee45a1]114
[2b16350]115    GnuTLSCacheTimeout SECONDS
[4ee45a1]116
[2b16350]117Default: `GnuTLSCacheTimeout 300`\
118Context: server config
[4ee45a1]119
[743e31f]120Sets the timeout for TLS Session Cache entries expiration.  This
[2b16350]121directive is valid even if Session Tickets are used, and indicates the
122expiration time of the ticket in seconds.
[4ee45a1]123
[df49a2d]124### GnuTLSSessionTickets
[4ee45a1]125
[2b16350]126Enable Session Tickets for the server
[4ee45a1]127
[2b16350]128    GnuTLSSessionTickets [on|off]
[4ee45a1]129
[2b16350]130Default: `off`\
131Context: server config, virtual host
[4ee45a1]132
133To avoid storing data for TLS session resumption it is allowed to
[e9ef72c]134provide client with a ticket, to use on return. Tickets are an
135alternative to using a session cache, mostly used for busy servers
136with limited storage. For a pool of servers this option is not
137recommended since the tickets are bound to the issuing server only.
[4ee45a1]138
[e9ef72c]139If this option is set in the global configuration, virtual hosts
140without a `GnuTLSSessionTickets` setting will use the global setting.
141
142*Warning:* Currently the master key that protects the tickets is
143generated only on server start, and there is no mechanism to roll over
144the key. If session tickets are enabled it is highly recommened to
145restart the server regularly to protect past sessions in case an
146attacker gains access to server memory.
[4ee45a1]147
[df49a2d]148### GnuTLSClientVerify
[4ee45a1]149
[df49a2d]150Enable Client Certificate Verification
[4ee45a1]151
[2b16350]152    GnuTLSClientVerify [ignore|request|require]
[4ee45a1]153
[2b16350]154Default: `ignore`\
155Context: server config, virtual host, directory, .htaccess
[4ee45a1]156
[743e31f]157This directive controls the use of TLS Client Certificate
[2b16350]158Authentication. If used in the .htaccess context, it can force TLS
159re-negotiation.
[4ee45a1]160
[2b16350]161`ignore`
[743e31f]162:   `mod_gnutls` will ignore the contents of any TLS Client Certificates
[2b16350]163    sent. It will not request that the client sends a certificate.
[4ee45a1]164
[2b16350]165`request`
166:   The client certificate will be requested, but not required.
167    The Certificate will be validated if sent.  The output of the
168    validation status will be stored in the `SSL_CLIENT_VERIFY`
169    environment variable and can be `SUCCESS`, `FAILED` or `NONE`.
[4ee45a1]170
[2b16350]171`require`
172:   A Client certificate will be required. Any requests without a valid
173    client certificate will be denied.  The `SSL_CLIENT_VERIFY`
174    environment variable will only be set to `SUCCESS`.
[4ee45a1]175
[df49a2d]176### GnuTLSDHFile
[4ee45a1]177
[2b16350]178Set to the PKCS \#3 encoded Diffie Hellman parameters
[4ee45a1]179
[2b16350]180    GnuTLSDHFile FILEPATH
[4ee45a1]181
[2b16350]182Default: *none*\
183Context: server config, virtual host
[4ee45a1]184
[2b16350]185Takes an absolute or relative path to a PKCS \#3 encoded DH
186parameters.Those are used when the DHE key exchange method is enabled.
187You can generate this file using `certtool --generate-dh-params --bits
1882048`.  If not set `mod_gnutls` will use the included parameters.
[4ee45a1]189
[df49a2d]190### GnuTLSPriorities
[4ee45a1]191
[c3c96ca]192Set the allowed protocol versions, ciphers, key exchange algorithms,
193MACs and compression methods
[4ee45a1]194
[5409165]195    GnuTLSPriorities NORMAL:+CIPHER_0:+CIPHER_1:...:+CIPHER_N
[4ee45a1]196
[2b16350]197Default: *none*\
198Context: server config, virtual host
[4ee45a1]199
[c3c96ca]200Takes a colon separated list of protocol version, ciphers, key
201exchange methods message authentication codes, and compression methods
202to enable. The allowed keywords are specified in the
203`gnutls_priority_init()` function of GnuTLS.
[4ee45a1]204
[c3c96ca]205Please refer to [the GnuTLS documentation](https://gnutls.org/manual/html_node/Priority-Strings.html#Priority-Strings)
206for details. A few commonly used sets are listed below, note that
207their exact meaning may change with GnuTLS versions.
[4ee45a1]208
[2b16350]209`PERFORMANCE`
[c3c96ca]210:   A list with all the secure cipher combinations sorted in terms of
211    performance.
[4ee45a1]212
[2b16350]213`NORMAL`
214:   A list with all the secure cipher combinations sorted
215    with respect to security margin (subjective term).
[4ee45a1]216
[c3c96ca]217`SECURE128`
218:   A list with all the secure cipher suites that offer a security level
219    of 128-bit or more.
[4ee45a1]220
[c3c96ca]221`PFS`
222:   Only cipher suites offering perfect forward secrecy (ECDHE and DHE),
223    sorted by security margin.
[4ee45a1]224
[c3c96ca]225You can add or remove algorithms using the `+` and `!` prefixes
226respectively. For example, in order to use the `NORMAL` set but
227disable TLS 1.0 and 1.1 you can use the string
228`NORMAL:!VERS-TLS1.0:!VERS-TLS1.1`.
[4ee45a1]229
[2b16350]230You can find a list of all supported Ciphers, Versions, MACs, etc.  by
231running `gnutls-cli --list`.
[4ee45a1]232
[df49a2d]233### GnuTLSP11Module
[8873a06]234
[7764015]235Load this PKCS #11 module.
[8873a06]236
237    GnuTLSP11Module PATH_TO_LIBRARY
238
239Default: *none*\
240Context: server config
241
[9ca1f21]242Load this PKCS #11 provider module, instead of the system
243defaults. May occur multiple times to load multiple modules.
[8873a06]244
[df49a2d]245### GnuTLSPIN
[031acac]246
247Set the PIN to be used to access encrypted key files or PKCS #11 objects.
248
249    GnuTLSPIN XXXXXX
250
251Default: *none*\
252Context: server config, virtual host
253
254Takes a string to be used as a PIN for the protected objects in
255a security module, or as a key to be used to decrypt PKCS #8, PKCS #12,
256or openssl encrypted keys.
257
[df49a2d]258### GnuTLSSRKPIN
[031acac]259
[df49a2d]260Set the SRK PIN to be used to access the TPM.
[031acac]261
262    GnuTLSSRKPIN XXXXXX
263
264Default: *none*\
265Context: server config, virtual host
266
267Takes a string to be used as a PIN for the protected objects in
268the TPM module.
269
[df49a2d]270### GnuTLSExportCertificates
[4ee45a1]271
[2b16350]272Export the PEM encoded certificates to CGIs
[4ee45a1]273
[999cdec]274    GnuTLSExportCertificates [off|on|SIZE]
[4ee45a1]275
[2b16350]276Default: `off`\
277Context: server config, virtual host
[4ee45a1]278
[999cdec]279This directive configures exporting the full certificates of the
280server and the client to CGI scripts via the `SSL_SERVER_CERT` and
281`SSL_CLIENT_CERT` environment variables. The exported certificates
282will be PEM-encoded (if X.509) or ASCII-armored (if OpenPGP) up to the
283size given.  The type of the certificate will be exported in
284`SSL_SERVER_CERT_TYPE` and `SSL_CLIENT_CERT_TYPE`.
285
286SIZE should be an integer number of bytes, or may be written with a
287trailing `K` to indicate kibibytes.  `off` means the same thing as
288`0`, in which case the certificates will not be exported to the
289environment.  `on` is an alias for `16K`.  If a non-zero size is
290specified for this directive, but a certificate is too large to fit in
291the buffer, then the corresponding environment variable will contain
292the fixed string `GNUTLS_CERTIFICATE_SIZE_LIMIT_EXCEEDED`.
293
[2b16350]294With GnuTLSExportCertificates enabled, `mod_gnutls` exports the same
295environment variables to the CGI process as `mod_ssl`.
[4ee45a1]296
[df49a2d]297X.509 Certificate Authentication
298--------------------------------
299
300### GnuTLSCertificateFile
[d8ae2a0]301
[df49a2d]302Set to the PEM Encoded Server Certificate
303
304    GnuTLSCertificateFile FILEPATH
305
306Default: *none*\
307Context: server config, virtual host
308
309Takes an absolute or relative path to a PEM-encoded X.509 certificate to
310use as this Server's End Entity (EE) certificate. If you need to supply
311certificates for intermediate Certificate Authorities (iCAs), they
312should be listed in sequence in the file, from EE to the iCA closest to
313the root CA. Optionally, you can also include the root CA's certificate
314as the last certificate in the list.
315
316Since version 0.7 this can be a PKCS #11 URL.
317
318### GnuTLSKeyFile
319
320Set to the PEM Encoded Server Private Key
321
322    GnuTLSKeyFile FILEPATH
323
324Default: *none*\
325Context: server config, virtual host
326
327Takes an absolute or relative path to the Server Private Key. Set
328`GnuTLSPIN` if the key file is encrypted.
329
330Since version 0.7 this can be a PKCS #11 URL.
331
332**Security Warning:**\
333This private key must be protected. It is read while Apache is still
334running as root, and does not need to be readable by the nobody or
335apache user.
336
337### GnuTLSClientCAFile
338
339Set the PEM encoded Certificate Authority list to use for X.509 base
340client authentication
341
342    GnuTLSClientCAFile FILEPATH
343
344Default: *none*
345Context: server config, virtual host
346
347Takes an absolute or relative path to a PEM Encoded Certificate to use
348as a Certificate Authority with Client Certificate Authentication.
349This file may contain a list of trusted authorities.
350
351OpenPGP Certificate Authentication
352----------------------------------
353
354### GnuTLSPGPCertificateFile
355
356Set to a base64 Encoded Server OpenPGP Certificate
357
358    GnuTLSPGPCertificateFile FILEPATH
359
360Default: *none*\
361Context: server config, virtual host
362
363Takes an absolute or relative path to a base64 Encoded OpenPGP
364Certificate to use as this Server's Certificate.
365
366### GnuTLSPGPKeyFile
367
368Set to the Server OpenPGP Secret Key
369
370    GnuTLSPGPKeyFile FILEPATH
371
372Default: *none*\
373Context: server config, virtual host
374
375Takes an absolute or relative path to the Server Private Key. This key
376cannot currently be password protected.
377
378**Security Warning:**\
379 This private key must be protected. It is read while Apache is still
380running as root, and does not need to be readable by the nobody or
381apache user.
382
383### GnuTLSPGPKeyringFile
384
385Set to a base64 Encoded key ring
386
387    GnuTLSPGPKeyringFile FILEPATH
388
389Default: *none*\
390Context: server config, virtual host
391
392Takes an absolute or relative path to a base64 Encoded Certificate
393list (key ring) to use as a means of verification of Client
394Certificates.  This file should contain a list of trusted signers.
395
396SRP Authentication
397------------------
398
399### GnuTLSSRPPasswdFile
400
401Set to the SRP password file for SRP ciphersuites
402
403    GnuTLSSRPPasswdFile FILEPATH
404
405Default: *none*\
406Context: server config, virtual host
407
408Takes an absolute or relative path to an SRP password file. This is
409the same format as used in libsrp.  You can generate such file using
410the command `srptool --passwd /etc/tpasswd --passwd-conf
411/etc/tpasswd.conf -u test` to set a password for user test.  This
412password file holds the username, a password verifier and the
413dependency to the SRP parameters.
414
415### GnuTLSSRPPasswdConfFile
416
417Set to the SRP password.conf file for SRP ciphersuites
418
419    GnuTLSSRPPasswdConfFile FILEPATH
420
421Default: *none*\
422Context: server config, virtual host
423
424Takes an absolute or relative path to an SRP password.conf file. This
425is the same format as used in `libsrp`.  You can generate such file
426using the command `srptool --create-conf /etc/tpasswd.conf`.  This
427file holds the SRP parameters and is associate with the password file
428(the verifiers depends on these parameters).
429
430TLS Proxy Configuration
431-----------------------
432
433### GnuTLSProxyEngine
[d8ae2a0]434
435Enable TLS proxy connections for this virtual host
436
[a2e3c33]437    GnuTLSProxyEngine [on|off]
[d8ae2a0]438
439Default: *off*\
440Context: virtual host
441
442This directive enables support for TLS proxy connections for a virtual
443host.
444
[df49a2d]445### GnuTLSProxyCAFile
[d8ae2a0]446
[809c422]447Set to the PEM encoded Certificate Authority Certificate
[d8ae2a0]448
449    GnuTLSProxyCAFile FILEPATH
450
451Default: *none*\
452Context: server config, virtual host
453
[809c422]454Takes an absolute or relative path to a PEM encoded certificate to use
[d8ae2a0]455as a Certificate Authority when verifying certificates provided by
456proxy back end servers. This file may contain a list of trusted
457authorities. If not set, verification of TLS back end servers will
458always fail due to lack of a trusted CA.
459
[df49a2d]460### GnuTLSProxyCRLFile
[809c422]461
462Set to the PEM encoded Certificate Revocation List
463
464    GnuTLSProxyCRLFile FILEPATH
465
466Default: *none*\
467Context: server config, virtual host
468
469Takes an absolute or relative path to a PEM encoded Certificate
470Revocation List to use when verifying certificates provided by proxy
471back end servers. The file may contain a list of CRLs.
472
[df49a2d]473### GnuTLSProxyCertificateFile
[d8ae2a0]474
[809c422]475Set to the PEM encoded Client Certificate
[d8ae2a0]476
477    GnuTLSProxyCertificateFile FILEPATH
478
479Default: *none*\
480Context: server config, virtual host
481
[809c422]482Takes an absolute or relative path to a PEM encoded X.509 certificate
[d8ae2a0]483to use as this Server's End Entity (EE) client certificate for TLS
484client authentication in proxy TLS connections. If you need to supply
485certificates for intermediate Certificate Authorities (iCAs), they
486should be listed in sequence in the file, from EE to the iCA closest
487to the root CA. Optionally, you can also include the root CA's
488certificate as the last certificate in the list.
489
490If not set, TLS client authentication will be disabled for TLS proxy
491connections. If set, `GnuTLSProxyKeyFile` must be set as well to
492provide the matching private key.
493
[df49a2d]494### GnuTLSProxyKeyFile
[d8ae2a0]495
[809c422]496Set to the PEM encoded Private Key
[d8ae2a0]497
498    GnuTLSProxyKeyFile FILEPATH
499
500Default: *none*\
501Context: server config, virtual host
502
503Takes an absolute or relative path to the Private Key matching the
504certificate configured using the `GnuTLSProxyCertificateFile`
505directive. This key cannot currently be password protected.
506
507**Security Warning:**\
508This private key must be protected. It is read while Apache is still
509running as root, and does not need to be readable by the nobody or
510apache user.
511
[df49a2d]512### GnuTLSProxyPriorities
[f030883]513
514Set the allowed ciphers, key exchange algorithms, MACs and compression
515methods for proxy connections
516
517    GnuTLSProxyPriorities NORMAL:+CIPHER_0:+CIPHER_1:...:+CIPHER_N
518
519Default: *none*\
520Context: server config, virtual host
521
522This option is used to set the allowed ciphers, key exchange
523algorithms, MACs and compression methods for proxy connections. It
524takes the same parameters as `GnuTLSPriorities`. Required if
[a2e3c33]525`GnuTLSProxyEngine` is `On`.
[f030883]526
[df49a2d]527OCSP Stapling Configuration
528---------------------------
529
530### GnuTLSOCSPStapling
[5a5032f]531
532EXPERIMENTAL: Enable OCSP stapling for this (virtual) host.
533
534    GnuTLSOCSPStapling [On|Off]
535
536Default: *off*\
537Context: server config, virtual host
538
539OCSP stapling, formally known as the TLS Certificate Status Request
540extension, allows the server to provide the client with an OCSP
541response for its certificate during the handshake. This way the client
542does not have to send an OCSP request to the CA to check the
543certificate status, which offers privacy and performance advantages.
544
545Using OCSP stapling has a few requirements:
546
547* Caching OCSP responses requires a cache, so `GnuTLSCache` must not
548  be `none`.
549* `GnuTLSCertificateFile` must contain the issuer CA certificate in
550  addition to the server certificate so responses can be verified.
551* The certificate must either contain an OCSP access URI using HTTP,
552  or `GnuTLSOCSPResponseFile` must be set.
553
554OCSP cache updates are serialized using the `gnutls-ocsp` mutex.
555
[df49a2d]556### GnuTLSOCSPResponseFile
[5a5032f]557
558EXPERIMENTAL: Read the OCSP response for stapling from this file
559instead of sending a request over HTTP
560
561    GnuTLSOCSPResponseFile /path/to/response.der
562
563Default: *empty*\
564Context: server config, virtual host
565
566The response file must be updated externally, for example using a cron
567job. This option is an alternative to the server fetching OCSP
568responses over HTTP. Reasons to use this option include:
569
570* Performing OCSP requests separate from the web server, to prevent slow
571  responses from stalling handshakes.
572* The issuer CA uses an access method other than HTTP.
573* Testing
574
[df49a2d]575### GnuTLSOCSPGraceTime
[5a5032f]576
577EXPERIMENTAL: Replace cached OCSP responses this many seconds before
578they expire.
579
580    GnuTLSOCSPGraceTime SECONDS
581
582Default: *60*\
583Context: server config, virtual host
584
585A cached OCSP response should be updated a little before it expires to
586account for potential clock skew between server, CA, and client, as
587well as transmission time in corner cases.
588
[4ee45a1]589* * * * *
590
591Configuration Examples
[2b16350]592======================
[4ee45a1]593
[743e31f]594Simple Standard TLS Example
[2b16350]595---------------------------
[4ee45a1]596
[fc124e9]597The following is an example of simple TLS hosting, using one IP
598Addresses for each virtual host.
[4ee45a1]599
[2b16350]600     # Load the module into Apache.
601     LoadModule gnutls_module modules/mod_gnutls.so
602     GnuTLSCache gdbm /var/cache/www-tls-cache
603     GnuTLSCacheTimeout 500
[fc124e9]604
605     # Without SNI you need one IP Address per-site.
606     Listen 192.0.2.1:443
607     Listen 192.0.2.2:443
608     Listen 192.0.2.3:443
609     Listen 192.0.2.4:443
610
611     <VirtualHost 192.0.2.1:443>
612         GnuTLSEnable on
613         GnuTLSPriorities SECURE128
614         DocumentRoot /www/site1.example.com/html
615         ServerName site1.example.com:443
616         GnuTLSCertificateFile conf/tls/site1.crt
617         GnuTLSKeyFile conf/tls/site1.key
[2b16350]618     </VirtualHost>
[fc124e9]619
620     <VirtualHost 192.0.2.2:443>
621         # This virtual host enables SRP authentication
622         GnuTLSEnable on
623         GnuTLSPriorities NORMAL:+SRP
624         DocumentRoot /www/site2.example.com/html
625         ServerName site2.example.com:443
626         GnuTLSSRPPasswdFile conf/tls/tpasswd.site2
627         GnuTLSSRPPasswdConfFile conf/tls/tpasswd.site2.conf
[2b16350]628     </VirtualHost>
[fc124e9]629
630     <VirtualHost 192.0.2.3:443>
631         # This server enables SRP, OpenPGP and X.509 authentication.
632         GnuTLSEnable on
633         GnuTLSPriorities NORMAL:+SRP:+SRP-RSA:+SRP-DSS:+CTYPE-OPENPGP
634         DocumentRoot /www/site3.example.com/html
635         ServerName site3.example.com:443
636         GnuTLSCertificateFile conf/tls/site3.crt
637         GnuTLSKeyFile conf/tls/site3.key
638         GnuTLSClientVerify ignore
639         GnuTLSPGPCertificateFile conf/tls/site3.pub.asc
640         GnuTLSPGPKeyFile conf/tls/site3.sec.asc
641         GnuTLSSRPPasswdFile conf/tls/tpasswd.site3
642         GnuTLSSRPPasswdConfFile conf/tls/tpasswd.site3.conf
[2b16350]643     </VirtualHost>
[fc124e9]644
645     <VirtualHost 192.0.2.4:443>
646         GnuTLSEnable on
647         # %COMPAT disables some security features to enable maximum
648         # compatibility with clients. Don't use this if you need strong
649         # security.
650         GnuTLSPriorities NORMAL:%COMPAT
651         DocumentRoot /www/site4.example.com/html
652         ServerName site4.example.com:443
653         GnuTLSCertificateFile conf/tls/site4.crt
654         GnuTLSKeyFile conf/tls/site4.key
[2b16350]655     </VirtualHost>
656
657Server Name Indication Example
658------------------------------
659
[fc124e9]660`mod_gnutls` supports "Server Name Indication", as specified in
661RFC 3546. This allows hosting many TLS websites with a single IP
662address. All recent browsers support this standard. Here is an
663example using SNI:
[2b16350]664
665     # Load the module into Apache.
666     LoadModule gnutls_module modules/mod_gnutls.so
[fc124e9]667
668     # SNI allows hosting multiple sites using one IP address. This
669     # could also be 'Listen *:443', just like '*:80' is common for
670     # non-HTTPS
671     Listen 198.51.100.1:443
672
673     <VirtualHost _default_:443>
674         GnuTLSEnable on
675         GnuTLSSessionTickets on
676         GnuTLSPriorities NORMAL
677         DocumentRoot /www/site1.example.com/html
678         ServerName site1.example.com:443
679         GnuTLSCertificateFile conf/tls/site1.crt
680         GnuTLSKeyFile conf/tls/site1.key
[2b16350]681     </VirtualHost>
[4ee45a1]682
[fc124e9]683     <VirtualHost _default_:443>
684         GnuTLSEnable on
685         GnuTLSPriorities NORMAL
686         DocumentRoot /www/site2.example.com/html
687         ServerName site2.example.com:443
688         GnuTLSCertificateFile conf/tls/site2.crt
689         GnuTLSKeyFile conf/tls/site2.key
690     </VirtualHost>
[4ee45a1]691
[fc124e9]692     <VirtualHost _default_:443>
693         GnuTLSEnable on
694         GnuTLSPriorities NORMAL
695         DocumentRoot /www/site3.example.com/html
696         ServerName site3.example.com:443
697         GnuTLSCertificateFile conf/tls/site3.crt
698         GnuTLSKeyFile conf/tls/site3.key
699     </VirtualHost>
[4ee45a1]700
[fc124e9]701     <VirtualHost _default_:443>
702         GnuTLSEnable on
703         GnuTLSPriorities NORMAL
704         DocumentRoot /www/site4.example.com/html
705         ServerName site4.example.com:443
706         GnuTLSCertificateFile conf/tls/site4.crt
707         GnuTLSKeyFile conf/tls/site4.key
708     </VirtualHost>
[2b16350]709
[fc124e9]710OCSP Stapling Example
711---------------------
[2b16350]712
[fc124e9]713This example uses an X.509 server certificate. The server will fetch
714OCSP responses from the responder listed in the certificate and store
715them im a memcached cache shared with another server.
[2b16350]716
717     # Load the module into Apache.
718     LoadModule gnutls_module modules/mod_gnutls.so
[fc124e9]719     GnuTLSCache memcache "192.0.2.1:11211 192.0.2.2:11211"
[2b16350]720     GnuTLSCacheTimeout 600
[fc124e9]721
722     Listen 192.0.2.1:443
723
724     <VirtualHost _default_:443>
725         GnuTLSEnable          On
726         GnuTLSPriorities      NORMAL
727         DocumentRoot          /www/site1.example.com/html
728         ServerName            site1.example.com:443
729         GnuTLSCertificateFile conf/tls/site1.crt
730         GnuTLSKeyFile         conf/tls/site1.key
731         GnuTLSPriorities      NORMAL
732         GnuTLSOCSPStapling    On
[2b16350]733     </VirtualHost>
[4ee45a1]734
735* * * * *
736
[2b16350]737Environment Variables
738=====================
[4ee45a1]739
[2b16350]740`mod_gnutls` exports the following environment variables to scripts.
741These are compatible with `mod_ssl`.
[4ee45a1]742
[2b16350]743`HTTPS`
744-------
[4ee45a1]745
[2b16350]746Can be `on` or `off`
[4ee45a1]747
[2b16350]748`SSL_VERSION_LIBRARY`
749---------------------
[4ee45a1]750
[2b16350]751The version of the GnuTLS library
[4ee45a1]752
[2b16350]753`SSL_VERSION_INTERFACE`
754-----------------------
[4ee45a1]755
756The version of this module
757
[2b16350]758`SSL_PROTOCOL`
759--------------
[4ee45a1]760
[2b16350]761The SSL or TLS protocol name (such as `TLS 1.0` etc.)
[4ee45a1]762
[2b16350]763`SSL_CIPHER`
764------------
[4ee45a1]765
766The SSL or TLS cipher suite name
767
[2b16350]768`SSL_COMPRESS_METHOD`
769---------------------
[4ee45a1]770
[2b16350]771The negotiated compression method (`NULL` or `DEFLATE`)
[4ee45a1]772
[2b16350]773`SSL_SRP_USER`
774--------------
[4ee45a1]775
776The SRP username used for authentication (only set when
[2b16350]777`GnuTLSSRPPasswdFile` and `GnuTLSSRPPasswdConfFile` are configured).
[4ee45a1]778
[2b16350]779`SSL_CIPHER_USEKEYSIZE` & `SSL_CIPHER_ALGKEYSIZE`
780-------------------------------------------------
[4ee45a1]781
782The number if bits used in the used cipher algorithm.
783
784This does not fully reflect the security level since the size of
785RSA or DHE key exchange parameters affect the security level too.
786
[5674676]787`SSL_DH_PRIME_BITS`
788-------------------
789
790The number if bits in the modulus for the DH group, if DHE or static
791DH is used.
792
793This will not be set if DH is not used.
794
[2b16350]795`SSL_CIPHER_EXPORT`
796-------------------
[4ee45a1]797
[2b16350]798`True` or `False`. Whether the cipher suite negotiated is an export one.
[4ee45a1]799
[2b16350]800`SSL_SESSION_ID`
801----------------
[4ee45a1]802
803The session ID negotiated in this session. Can be the same during client
804reloads.
805
[2b16350]806`SSL_CLIENT_V_REMAIN`
807---------------------
[4ee45a1]808
809The number of days until the client's certificate is expired.
810
[2b16350]811`SSL_CLIENT_V_START`
812--------------------
[4ee45a1]813
814The activation time of client's certificate.
815
[2b16350]816`SSL_CLIENT_V_END`
817------------------
[4ee45a1]818
819The expiration time of client's certificate.
820
[2b16350]821`SSL_CLIENT_S_DN`
822-----------------
[4ee45a1]823
824The distinguished name of client's certificate in RFC2253 format.
825
[2b16350]826`SSL_CLIENT_I_DN`
827-----------------
[4ee45a1]828
829The SSL or TLS cipher suite name
830
[2b16350]831`SSL_CLIENT_S_AN%`
832------------------
[4ee45a1]833
[2b16350]834These will contain the alternative names of the client certificate (`%` is
[4ee45a1]835a number starting from zero).
836
[2b16350]837The values will be prepended by `DNSNAME:`, `RFC822NAME:` or `URI:`
[4ee45a1]838depending on the type.
839
[2b16350]840If it is not supported the value `UNSUPPORTED` will be set.
[4ee45a1]841
[2b16350]842`SSL_SERVER_M_SERIAL`
843---------------------
[4ee45a1]844
845The serial number of the server's certificate.
846
[2b16350]847`SSL_SERVER_M_VERSION`
848----------------------
[4ee45a1]849
850The version of the server's certificate.
851
[2b16350]852`SSL_SERVER_A_SIG`
853------------------
[4ee45a1]854
855The algorithm used for the signature in server's certificate.
856
[2b16350]857`SSL_SERVER_A_KEY`
858------------------
[4ee45a1]859
860The public key algorithm in server's certificate.
861
[999cdec]862`SSL_SERVER_CERT`
[2b16350]863------------------
[4ee45a1]864
[999cdec]865The PEM-encoded (X.509) or ASCII-armored (OpenPGP) server certificate
866(see the `GnuTLSExportCertificates` directive).
[4ee45a1]867
[2b16350]868`SSL_SERVER_CERT_TYPE`
869----------------------
[4ee45a1]870
[2b16350]871The certificate type can be `X.509` or `OPENPGP`.
[ac32bb5]872
[999cdec]873`SSL_CLIENT_CERT`
874------------------
875
876The PEM-encoded (X.509) or ASCII-armored (OpenPGP) client certificate
877(see the `GnuTLSExportCertificates` directive).
878
[ac32bb5]879`SSL_CLIENT_CERT_TYPE`
880----------------------
881
882The certificate type can be `X.509` or `OPENPGP`.
Note: See TracBrowser for help on using the repository browser.