source: mod_gnutls/test/Makefile.am @ 1c2b936

proxy-ticket
Last change on this file since 1c2b936 was 1c2b936, checked in by Fiona Klute <fiona.klute@…>, 10 months ago

Test suite: Use the new Python-based test client

  • Property mode set to 100644
File size: 11.6 KB
Line 
1SUBDIRS = tests
2
3dist_check_SCRIPTS = test-00_basic.bash \
4        test-01_serverwide_priorities.bash \
5        test-02_cache_in_vhost.bash \
6        test-03_cachetimeout_in_vhost.bash \
7        test-04_basic_nosni.bash \
8        test-05_mismatched-priorities.bash \
9        test-06_verify_sni_a.bash \
10        test-07_verify_sni_b.bash \
11        test-08_verify_no_sni_fallback_to_first_vhost.bash \
12        test-09_verify_no_sni_fails_with_wrong_order.bash \
13        test-10_basic_client_verification.bash \
14        test-11_basic_client_verification_fail.bash \
15        test-12_cgi_variables.bash \
16        test-13_cgi_variables_no_client_cert.bash \
17        test-14_resume_session.bash
18if USE_MSVA
19dist_check_SCRIPTS += test-15_basic_msva.bash
20endif
21dist_check_SCRIPTS += test-16_view-status.bash \
22        test-17_cgi_vars_large_cert.bash \
23        test-18_client_verification_wrong_cert.bash \
24        test-19_TLS_reverse_proxy.bash \
25        test-20_TLS_reverse_proxy_client_auth.bash \
26        test-21_TLS_reverse_proxy_wrong_cert.bash \
27        test-22_TLS_reverse_proxy_crl_revoke.bash \
28        test-23_TLS_reverse_proxy_mismatched_priorities.bash \
29        test-24_pkcs11_cert.bash \
30        test-25_Disable_TLS_1.0.bash \
31        test-26_redirect_HTTP_to_HTTPS.bash \
32        test-27_OCSP_server.bash \
33        test-28_HTTP2_support.bash \
34        test-29_force_handshake_vhost.bash \
35        test-30_ip_based_vhosts.bash \
36        test-31_vhost_SNI_serveralias_match.bash \
37        test-32_vhost_SNI_serveralias_mismatch.bash \
38        test-33_vhost_SNI_serveralias_missinghost.bash \
39        test-34_TLS_reverse_proxy_h2.bash
40
41TEST_EXTENSIONS = .bash
42TESTS = $(dist_check_SCRIPTS)
43
44check_PROGRAMS = pgpcrc
45pgpcrc_SOURCES = pgpcrc.c
46
47# build OCSP database tool
48if ENABLE_OCSP_TEST
49check_PROGRAMS += gen_ocsp_index
50gen_ocsp_index_SOURCES = gen_ocsp_index.c cert_helper.c
51gen_ocsp_index_CFLAGS = $(LIBGNUTLS_CFLAGS)
52gen_ocsp_index_LDFLAGS = $(LIBGNUTLS_LIBS)
53noinst_HEADERS = cert_helper.h
54endif
55
56# Identities in the miniature CA, server, and client environment for
57# the test suite
58shared_identities = authority authority/client
59pgp_identities = $(shared_identities)
60x509_only_identities = authority/server authority/imposter \
61        authority/subca authority/subca/server \
62        rogueca rogueca/rogueclient
63if ENABLE_OCSP_TEST
64x509_only_identities += authority/ocsp-responder authority/subca/ocsp-responder
65endif
66x509_identities = $(shared_identities) $(x509_only_identities)
67identities = $(shared_identities) $(x509_only_identities)
68# Append strings after ":=" to each identity to generate a list of
69# necessary files
70pgp_tokens = $(pgp_identities:=/cert.pgp) \
71        $(pgp_identities:=/secret.pgp)
72x509_keys = $(x509_identities:=/secret.key)
73x509_certs = $(x509_identities:=/x509.pem)
74x509_tokens = $(x509_certs) $(x509_keys)
75tokens = $(x509_tokens)
76if USE_MSVA
77tokens += $(pgp_tokens)
78endif
79
80if !DISABLE_FLOCK
81# flock command for write access to the authority keyring
82GPG_FLOCK = @FLOCK@ authority/lock
83endif
84
85include $(srcdir)/test_ca.mk
86
87# Test cases trying to create keys and certificates in parallel causes
88# race conditions. Ensure that all keys and certificates are generated
89# before tests get to run.
90#
91# NOTE: Once the support files have been generated, test cases can be
92# run with multiple jobs, but real parallelization would require
93# dynamic port assignments. At the moment, lock files ensure that only
94# one Apache instance (possibly plus a proxy back end instance) is
95# running at any time, so test cases actually have to wait for each
96# other - just not in any particular order.
97check_DATA = $(tokens) authority/server/crl.pem
98
99MOSTLYCLEANFILES = cache/* logs/* outputs/* authority/server/crl.pem
100
101cert_templates = authority/template.in authority/client/template.in \
102        authority/imposter/template.in authority/ocsp-responder/template \
103        authority/server/template.in \
104        authority/subca/template.in authority/subca/server/template.in \
105        authority/subca/ocsp-responder/template \
106        rogueca/template rogueca/rogueclient/template.in
107generated_templates = authority/template authority/client/template \
108        authority/imposter/template rogueca/rogueclient/template \
109        authority/server/template
110
111# Delete X.509 private keys on full clean. Note that unless you need
112# to generate fresh keys, the "mostlyclean" target should be
113# sufficient (see below).
114CLEANFILES = $(x509_keys)
115
116# Delete X.509 certificates and generated templates on "mostlyclean"
117# target. Certificates can be rebuilt without generating new key
118# pairs, and regenerating them makes it possible to change identities
119# (e.g. host names) without wasting time on new keys (which would
120# happen after "clean").
121MOSTLYCLEANFILES += $(x509_certs) $(generated_templates) $(identities:=/uid)
122
123
124# Delete PGP keyrings on "mostlyclean" target. They are created from
125# the X.509 private keys and certificates with an expiration time of
126# one day, so regenerating them is both fast and frequently
127# necessary.
128pgp_patterns = /*.pgp /*.pgp.raw /*.gpg /*.gpg~ /gpg.conf \
129        /*.kbx /*.kbx~ /S.gpg-agent /private-keys-v1.d/*
130MOSTLYCLEANFILES += $(foreach pat,$(pgp_patterns),$(pgp_identities:=$(pat))) \
131        authority/lock authority/tofu.db
132# GnuPG random pool, no need to regenerate on every build
133CLEANFILES += authority/random_seed
134
135# GnuPG 2 starts gpg-agent processes per GNUPGHOME (one for every PGP
136# identity) while creating the PGP certificates. This target is called
137# by both "check-local" and "mostlyclean-local": The former because
138# agent processes are started while preparing for "check" and are no
139# longer needed afterwards, the latter to make sure they are gone
140# along with their certificates.
141stop-gnupg-agent:
142        for id in $(pgp_identities) $(msva_home); do \
143                GNUPGHOME=$$id/ gpgconf --kill gpg-agent || true; \
144        done
145
146check-local: stop-gnupg-agent
147
148# Delete lock files for test servers on "mostlyclean" target.
149MOSTLYCLEANFILES += *.lock
150
151# rule to build MSVA trust database
152if USE_MSVA
153msva_home = msva.gnupghome
154check_DATA += $(msva_home)/trustdb.gpg authority/client/uid
155MOSTLYCLEANFILES += $(foreach pat,$(pgp_patterns),$(msva_home)$(pat))
156$(msva_home)/trustdb.gpg: authority/minimal.pgp authority/client/cert.pgp
157        mkdir -p -m 0700 $(dir $@)
158        GNUPGHOME=$(dir $@) gpg --import < $<
159        printf "%s:6:\n" "$$(GNUPGHOME=authority/ gpg --with-colons --list-secret-keys --fingerprint | grep ^fpr: | cut -f 10 -d :)" | GNUPGHOME=$(dir $@) gpg --import-ownertrust
160        GNUPGHOME=$(dir $@) gpg --import < authority/client/cert.pgp
161        printf "keyserver does-not-exist.example\n" > $(msva_home)/gpg.conf
162endif
163
164if ENABLE_OCSP_TEST
165# rules to build OCSP database
166ocsp_index_data = authority/ocsp_index.txt authority/ocsp_index.txt.attr \
167        authority/subca/ocsp_index.txt authority/subca/ocsp_index.txt.attr
168check_DATA += $(ocsp_index_data)
169MOSTLYCLEANFILES += $(ocsp_index_data)
170
171# The "find" command builds a list of all certificates directly below
172# the CA that aren't for the ocsp-responder.
173%/ocsp_index.txt: $(x509_tokens) gen_ocsp_index
174        ./gen_ocsp_index $$(find $(*) -mindepth 2 -maxdepth 2 ! -path '*/ocsp-responder/*' -name x509.pem) > $@
175
176%/ocsp_index.txt.attr:
177        @mkdir -m 0700 -p $(dir $@)
178        echo "unique_subject = no" > $@
179
180# Build certificate chain files. Note that intermediate tokens must be
181# listed explicitly, or the dependency chain will be broken because
182# the higher level pattern matches, too.
183chain_tokens = authority/server/x509-chain.pem \
184        authority/subca/x509-chain.pem \
185        authority/subca/server/x509-chain.pem
186check_DATA += $(chain_tokens)
187MOSTLYCLEANFILES += $(chain_tokens) authority/x509-chain.pem
188endif
189
190# SoftHSM tokens. Note that the SoftHSM 2 token is a directory and
191# hence has to be treated slightly differently.
192SOFTHSM_TOKEN = authority/server/softhsm.db
193SOFTHSM2_TOKEN = authority/server/softhsm2.db
194
195# Tokens should be cleaned whether or not the matching SoftHSM version
196# was detected on the last ./configure run.
197MOSTLYCLEANFILES += $(SOFTHSM_TOKEN)
198# included in mostlyclean-local below
199clean-softhsm2-db:
200        -rm -rf $(SOFTHSM2_TOKEN)
201
202if HAVE_SOFTHSM1
203check_DATA += $(SOFTHSM_TOKEN)
204endif HAVE_SOFTHSM1
205
206if HAVE_SOFTHSM2
207check_DATA += $(SOFTHSM2_TOKEN)
208endif HAVE_SOFTHSM2
209
210check_DATA += make-test-dirs
211extra_dirs = logs cache outputs
212make-test-dirs:
213        mkdir -p $(extra_dirs)
214
215.PHONY: make-test-dirs clean-softhsm2-db stop-gnupg-agent
216
217
218mostlyclean-local: clean-softhsm2-db stop-gnupg-agent
219        -rmdir $(pgp_identities:=/private-keys-v1.d) || true
220if USE_MSVA
221        -rmdir $(msva_home)/private-keys-v1.d || true
222endif
223
224# Delete test data directories, and wait for test services to
225# exit. The reason for the wait is that Apache instances may take some
226# time to exit and delete their PID files. Occasionally some PID files
227# where still around during "distcheck" runs by the time the target
228# checked if the build directory was really empty after "distclean",
229# breaking the build. Delaying "clean-local" until PID files are gone
230# avoids this issue, and the timeout will expose actually unclean
231# stops.
232clean-local:
233        -rmdir $(extra_dirs) || true
234if USE_MSVA
235        -rmdir $(msva_home) || true
236endif
237        wait=0; \
238        while ls *.pid && test "$$wait" -lt "@TEST_LOCK_WAIT@"; do \
239                wait=$$(($$wait + 1)); \
240                echo "waiting for test services to exit ($$wait seconds)"; \
241                sleep 1; \
242        done
243
244# Apache configuration and data files
245apache_data = base_apache.conf cgi_module.conf data/dump.cgi data/ocsp.cgi \
246        data/secret.txt data/test.txt ffdhe3072.pem mime.types \
247        proxy_mods.conf
248
249EXTRA_DIST = $(apache_data) $(cert_templates) $(shared_identities:=/uid.in) \
250        apache_service.bash common.bash runtests authority/server/crl.template \
251        softhsm.bash https-test-client.py
252
253# Lockfile for the main Apache process
254test_lockfile = ./test.lock
255# Lockfile for the proxy backend Apache process (if any)
256backend_lockfile = ./backend.lock
257# Lockfile for the OCSP server Apache process (if any)
258ocsp_lockfile = ./ocsp.lock
259
260# port for the main Apache server
261TEST_PORT ?= 9932
262# port for MSVA in test cases that use it
263MSVA_PORT ?= 9933
264# port for TLS proxy backend server
265BACKEND_PORT ?= 9934
266# port for the OCSP responder
267if ENABLE_OCSP_TEST
268OCSP_PORT ?= 9936
269OCSP_URI_TEMPLATE = ocsp_uri = http://$(TEST_HOST):$(OCSP_PORT)/ocsp/
270endif
271# maximum time to wait for MSVA startup (milliseconds)
272TEST_SERVICE_MAX_WAIT ?= 10000
273# wait loop time for MSVA startup (milliseconds)
274TEST_SERVICE_WAIT ?= 400
275
276AM_TESTS_ENVIRONMENT = export APACHE2=@APACHE2@; \
277        export AP_LIBEXECDIR=@AP_LIBEXECDIR@; \
278        export PYTHON="@PYTHON@"; \
279        export TEST_LOCK_WAIT="@TEST_LOCK_WAIT@"; \
280        export TEST_IP="@TEST_IP@"; \
281        export TEST_HOST="@TEST_HOST@"; \
282        export TEST_PORT="$(TEST_PORT)"; \
283        export MSVA_PORT="$(MSVA_PORT)"; \
284        export TEST_SERVICE_MAX_WAIT="$(TEST_SERVICE_MAX_WAIT)"; \
285        export TEST_SERVICE_WAIT="$(TEST_SERVICE_WAIT)"; \
286        export TEST_QUERY_TIMEOUT="@TEST_QUERY_TIMEOUT@"; \
287        export BACKEND_HOST="@TEST_HOST@"; \
288        export BACKEND_PORT="$(BACKEND_PORT)"; \
289        export HTTP_CLI="@HTTP_CLI@";
290
291if HAVE_SOFTHSM
292AM_TESTS_ENVIRONMENT += export SOFTHSM="@SOFTHSM@"; \
293        export SOFTHSM_MAJOR_VERSION="@SOFTHSM_MAJOR_VERSION@"; \
294        export SOFTHSM_LIB="@SOFTHSM_LIB@"
295endif
296
297if ENABLE_OCSP_TEST
298AM_TESTS_ENVIRONMENT += export OPENSSL="@OPENSSL@"; \
299        export OCSP_PORT="$(OCSP_PORT)";
300endif
301
302if ENABLE_NETNS
303AM_TESTS_ENVIRONMENT += export UNSHARE="@UNSHARE@"; \
304        export USE_TEST_NAMESPACE=1;
305endif
306# Without flock tests must not run in parallel, and PID files are used
307# to prevent conflicts between server instances. Otherwise set lock
308# files for flock.
309if DISABLE_FLOCK
310AM_TESTS_ENVIRONMENT += export TEST_LOCK="apache2.pid"; \
311        export BACKEND_LOCK="backend.pid"; \
312        export OCSP_LOCK="ocsp.pid";
313.NOTPARALLEL:
314else
315AM_TESTS_ENVIRONMENT += export FLOCK="@FLOCK@"; \
316        export TEST_LOCK="$(test_lockfile)"; \
317        export BACKEND_LOCK="$(backend_lockfile)"; \
318        export OCSP_LOCK="$(ocsp_lockfile)";
319endif
320
321# Echo AM_TESTS_ENVIRONMENT. This can be useful for debugging, e.g. if
322# you want to manually run an Apache instance with Valgrind using the
323# same configuration as a test case.
324show-test-env: export TEST_ENV=$(AM_TESTS_ENVIRONMENT)
325show-test-env:
326        @echo "$${TEST_ENV}"
Note: See TracBrowser for help on using the repository browser.