source: mod_gnutls/test/Makefile.am @ 482bafc

proxy-ticket
Last change on this file since 482bafc was 482bafc, checked in by Fiona Klute <fiona.klute@…>, 6 months ago

Test suite: Remove checks for no longer supported GnuTLS version

Mod_gnutls now requires 3.6.3, so checking for a gnutls-cli minimum
version of 3.5.12 has become pointless: The build would fail before
the tests with an older version.

This was the last used function from common.bash, so delete the file.

  • Property mode set to 100644
File size: 12.2 KB
Line 
1SUBDIRS = tests
2
3test_scripts = doctest-mgstest.py \
4        test-00_basic.bash \
5        test-01_serverwide_priorities.bash \
6        test-02_cache_in_vhost.bash \
7        test-03_cachetimeout_in_vhost.bash \
8        test-04_basic_nosni.bash \
9        test-05_mismatched-priorities.bash \
10        test-06_verify_sni_a.bash \
11        test-07_verify_sni_b.bash \
12        test-08_verify_no_sni_fallback_to_first_vhost.bash \
13        test-09_verify_no_sni_fails_with_wrong_order.bash \
14        test-10_basic_client_verification.bash \
15        test-11_basic_client_verification_fail.bash \
16        test-12_cgi_variables.bash \
17        test-13_cgi_variables_no_client_cert.bash \
18        test-14_resume_session.bash
19if USE_MSVA
20test_scripts += test-15_basic_msva.bash
21endif
22test_scripts += test-16_view-status.bash \
23        test-17_cgi_vars_large_cert.bash \
24        test-18_client_verification_wrong_cert.bash \
25        test-19_TLS_reverse_proxy.bash \
26        test-20_TLS_reverse_proxy_client_auth.bash \
27        test-21_TLS_reverse_proxy_wrong_cert.bash \
28        test-22_TLS_reverse_proxy_crl_revoke.bash \
29        test-23_TLS_reverse_proxy_mismatched_priorities.bash \
30        test-24_pkcs11_cert.bash \
31        test-25_Disable_TLS_1.0.bash \
32        test-26_redirect_HTTP_to_HTTPS.bash \
33        test-27_OCSP_server.bash \
34        test-28_HTTP2_support.bash \
35        test-29_force_handshake_vhost.bash \
36        test-30_ip_based_vhosts.bash \
37        test-31_vhost_SNI_serveralias_match.bash \
38        test-32_vhost_SNI_serveralias_mismatch.bash \
39        test-33_vhost_SNI_serveralias_missinghost.bash \
40        test-34_TLS_reverse_proxy_h2.bash
41
42TEST_EXTENSIONS = .bash .py
43PY_LOG_COMPILER = $(PYTHON)
44TESTS = $(test_scripts)
45
46dist_check_SCRIPTS = netns_py.bash $(test_scripts)
47
48check_PROGRAMS = pgpcrc
49pgpcrc_SOURCES = pgpcrc.c
50
51# build OCSP database tool
52if ENABLE_OCSP_TEST
53check_PROGRAMS += gen_ocsp_index
54gen_ocsp_index_SOURCES = gen_ocsp_index.c cert_helper.c
55gen_ocsp_index_CFLAGS = $(LIBGNUTLS_CFLAGS)
56gen_ocsp_index_LDFLAGS = $(LIBGNUTLS_LIBS)
57noinst_HEADERS = cert_helper.h
58endif
59
60# Python tools for tests
61noinst_PYTHON = https-test-client.py mgstest/http.py mgstest/__init__.py \
62        mgstest/hooks.py mgstest/services.py mgstest/tests.py runtest.py \
63        doctest-mgstest.py
64
65# Identities in the miniature CA, server, and client environment for
66# the test suite
67shared_identities = authority authority/client
68pgp_identities = $(shared_identities)
69x509_only_identities = authority/server authority/imposter \
70        authority/subca authority/subca/server \
71        rogueca rogueca/rogueclient
72if ENABLE_OCSP_TEST
73x509_only_identities += authority/ocsp-responder authority/subca/ocsp-responder
74endif
75x509_identities = $(shared_identities) $(x509_only_identities)
76identities = $(shared_identities) $(x509_only_identities)
77# Append strings after ":=" to each identity to generate a list of
78# necessary files
79pgp_tokens = $(pgp_identities:=/cert.pgp) \
80        $(pgp_identities:=/secret.pgp)
81x509_keys = $(x509_identities:=/secret.key)
82x509_certs = $(x509_identities:=/x509.pem)
83x509_tokens = $(x509_certs) $(x509_keys)
84tokens = $(x509_tokens)
85if USE_MSVA
86tokens += $(pgp_tokens)
87endif
88
89if !DISABLE_FLOCK
90# flock command for write access to the authority keyring
91GPG_FLOCK = @FLOCK@ authority/lock
92endif
93
94include $(srcdir)/test_ca.mk
95
96# Test cases trying to create keys and certificates in parallel causes
97# race conditions. Ensure that all keys and certificates are generated
98# before tests get to run.
99#
100# NOTE: Once the support files have been generated, test cases can be
101# run with multiple jobs, but real parallelization would require
102# dynamic port assignments. At the moment, lock files ensure that only
103# one Apache instance (possibly plus a proxy back end instance) is
104# running at any time, so test cases actually have to wait for each
105# other - just not in any particular order.
106check_DATA = $(tokens) authority/server/crl.pem
107
108MOSTLYCLEANFILES = cache/* logs/* outputs/* authority/server/crl.pem
109
110cert_templates = authority/template.in authority/client/template.in \
111        authority/imposter/template.in authority/ocsp-responder/template \
112        authority/server/template.in \
113        authority/subca/template.in authority/subca/server/template.in \
114        authority/subca/ocsp-responder/template \
115        rogueca/template rogueca/rogueclient/template.in
116generated_templates = authority/template authority/client/template \
117        authority/imposter/template rogueca/rogueclient/template \
118        authority/server/template
119
120# Delete X.509 private keys on full clean. Note that unless you need
121# to generate fresh keys, the "mostlyclean" target should be
122# sufficient (see below).
123CLEANFILES = $(x509_keys)
124
125# Delete X.509 certificates and generated templates on "mostlyclean"
126# target. Certificates can be rebuilt without generating new key
127# pairs, and regenerating them makes it possible to change identities
128# (e.g. host names) without wasting time on new keys (which would
129# happen after "clean").
130MOSTLYCLEANFILES += $(x509_certs) $(generated_templates) $(identities:=/uid)
131
132
133# Delete PGP keyrings on "mostlyclean" target. They are created from
134# the X.509 private keys and certificates with an expiration time of
135# one day, so regenerating them is both fast and frequently
136# necessary.
137pgp_patterns = /*.pgp /*.pgp.raw /*.gpg /*.gpg~ /gpg.conf \
138        /*.kbx /*.kbx~ /S.gpg-agent /private-keys-v1.d/*
139MOSTLYCLEANFILES += $(foreach pat,$(pgp_patterns),$(pgp_identities:=$(pat))) \
140        authority/lock authority/tofu.db
141# GnuPG random pool, no need to regenerate on every build
142CLEANFILES += authority/random_seed
143
144# GnuPG 2 starts gpg-agent processes per GNUPGHOME (one for every PGP
145# identity) while creating the PGP certificates. This target is called
146# by both "check-local" and "mostlyclean-local": The former because
147# agent processes are started while preparing for "check" and are no
148# longer needed afterwards, the latter to make sure they are gone
149# along with their certificates.
150stop-gnupg-agent:
151        for id in $(pgp_identities) $(msva_home); do \
152                GNUPGHOME=$$id/ gpgconf --kill gpg-agent || true; \
153        done
154
155check-local: stop-gnupg-agent
156
157# Delete lock files for test servers on "mostlyclean" target.
158MOSTLYCLEANFILES += *.lock
159
160# rule to build MSVA trust database
161if USE_MSVA
162msva_home = msva.gnupghome
163check_DATA += $(msva_home)/trustdb.gpg authority/client/uid
164MOSTLYCLEANFILES += $(foreach pat,$(pgp_patterns),$(msva_home)$(pat))
165$(msva_home)/trustdb.gpg: authority/minimal.pgp authority/client/cert.pgp
166        mkdir -p -m 0700 $(dir $@)
167        GNUPGHOME=$(dir $@) gpg --import < $<
168        printf "%s:6:\n" "$$(GNUPGHOME=authority/ gpg --with-colons --list-secret-keys --fingerprint | grep ^fpr: | cut -f 10 -d :)" | GNUPGHOME=$(dir $@) gpg --import-ownertrust
169        GNUPGHOME=$(dir $@) gpg --import < authority/client/cert.pgp
170        printf "keyserver does-not-exist.example\n" > $(msva_home)/gpg.conf
171endif
172
173if ENABLE_OCSP_TEST
174# rules to build OCSP database
175ocsp_index_data = authority/ocsp_index.txt authority/ocsp_index.txt.attr \
176        authority/subca/ocsp_index.txt authority/subca/ocsp_index.txt.attr
177check_DATA += $(ocsp_index_data)
178MOSTLYCLEANFILES += $(ocsp_index_data)
179
180# The "find" command builds a list of all certificates directly below
181# the CA that aren't for the ocsp-responder.
182%/ocsp_index.txt: $(x509_tokens) gen_ocsp_index
183        ./gen_ocsp_index $$(find $(*) -mindepth 2 -maxdepth 2 ! -path '*/ocsp-responder/*' -name x509.pem) > $@
184
185%/ocsp_index.txt.attr:
186        @mkdir -m 0700 -p $(dir $@)
187        echo "unique_subject = no" > $@
188
189# Build certificate chain files. Note that intermediate tokens must be
190# listed explicitly, or the dependency chain will be broken because
191# the higher level pattern matches, too.
192chain_tokens = authority/server/x509-chain.pem \
193        authority/subca/x509-chain.pem \
194        authority/subca/server/x509-chain.pem
195check_DATA += $(chain_tokens)
196MOSTLYCLEANFILES += $(chain_tokens) authority/x509-chain.pem
197endif
198
199# SoftHSM tokens. Note that the SoftHSM 2 token is a directory and
200# hence has to be treated slightly differently.
201SOFTHSM_TOKEN = authority/server/softhsm.db
202SOFTHSM2_TOKEN = authority/server/softhsm2.db
203
204# Tokens should be cleaned whether or not the matching SoftHSM version
205# was detected on the last ./configure run.
206MOSTLYCLEANFILES += $(SOFTHSM_TOKEN)
207# included in mostlyclean-local below
208clean-softhsm2-db:
209        -rm -rf $(SOFTHSM2_TOKEN)
210
211if HAVE_SOFTHSM1
212check_DATA += $(SOFTHSM_TOKEN)
213endif HAVE_SOFTHSM1
214
215if HAVE_SOFTHSM2
216check_DATA += $(SOFTHSM2_TOKEN)
217endif HAVE_SOFTHSM2
218
219check_DATA += make-test-dirs
220extra_dirs = logs cache outputs
221make-test-dirs:
222        mkdir -p $(extra_dirs)
223
224.PHONY: make-test-dirs clean-softhsm2-db stop-gnupg-agent
225
226
227mostlyclean-local: clean-softhsm2-db stop-gnupg-agent
228        -rmdir $(pgp_identities:=/private-keys-v1.d) || true
229if USE_MSVA
230        -rmdir $(msva_home)/private-keys-v1.d || true
231endif
232
233# Delete test data directories, and wait for test services to
234# exit. The reason for the wait is that Apache instances may take some
235# time to exit and delete their PID files. Occasionally some PID files
236# where still around during "distcheck" runs by the time the target
237# checked if the build directory was really empty after "distclean",
238# breaking the build. Delaying "clean-local" until PID files are gone
239# avoids this issue, and the timeout will expose actually unclean
240# stops.
241clean-local:
242        -rmdir $(extra_dirs) || true
243if USE_MSVA
244        -rmdir $(msva_home) || true
245endif
246        wait=0; \
247        while ls *.pid && test "$$wait" -lt "@TEST_LOCK_WAIT@"; do \
248                wait=$$(($$wait + 1)); \
249                echo "waiting for test services to exit ($$wait seconds)"; \
250                sleep 1; \
251        done
252
253# Apache configuration and data files
254apache_data = base_apache.conf cgi_module.conf data/dump.cgi data/ocsp.cgi \
255        data/test.txt mime.types proxy_mods.conf
256
257# Documentation for the test system
258test_doc = README.md sample_fail.yml sample_test.yml
259
260EXTRA_DIST = $(apache_data) $(cert_templates) $(shared_identities:=/uid.in) \
261        authority/server/crl.template softhsm.bash $(test_doc)
262
263# Lockfile for the main Apache process
264test_lockfile = ./test.lock
265# Lockfile for the proxy backend Apache process (if any)
266backend_lockfile = ./backend.lock
267# Lockfile for the OCSP server Apache process (if any)
268ocsp_lockfile = ./ocsp.lock
269
270# port for the main Apache server
271TEST_PORT ?= 9932
272# port for MSVA in test cases that use it
273MSVA_PORT ?= 9933
274# port for TLS proxy backend server
275BACKEND_PORT ?= 9934
276# port for plain HTTP server
277TEST_HTTP_PORT ?= 9935
278# port for the OCSP responder
279if ENABLE_OCSP_TEST
280OCSP_PORT ?= 9936
281OCSP_URI_TEMPLATE = ocsp_uri = http://$(TEST_HOST):$(OCSP_PORT)/ocsp/
282endif
283# maximum time to wait for MSVA startup (milliseconds)
284TEST_SERVICE_MAX_WAIT ?= 10000
285# wait loop time for MSVA startup (milliseconds)
286TEST_SERVICE_WAIT ?= 400
287
288AM_TESTS_ENVIRONMENT = export APACHE2=@APACHE2@; \
289        export AP_LIBEXECDIR=@AP_LIBEXECDIR@; \
290        export PYTHON="@PYTHON@"; \
291        export TEST_LOCK_WAIT="@TEST_LOCK_WAIT@"; \
292        export TEST_IP="@TEST_IP@"; \
293        export TEST_HOST="@TEST_HOST@"; \
294        export TEST_PORT="$(TEST_PORT)"; \
295        export MSVA_PORT="$(MSVA_PORT)"; \
296        export TEST_SERVICE_MAX_WAIT="$(TEST_SERVICE_MAX_WAIT)"; \
297        export TEST_SERVICE_WAIT="$(TEST_SERVICE_WAIT)"; \
298        export TEST_QUERY_TIMEOUT="@TEST_QUERY_TIMEOUT@"; \
299        export BACKEND_HOST="@TEST_HOST@"; \
300        export BACKEND_PORT="$(BACKEND_PORT)"; \
301        export TEST_HTTP_PORT="$(TEST_HTTP_PORT)"; \
302        export HTTP_CLI="@HTTP_CLI@";
303
304if HAVE_SOFTHSM
305AM_TESTS_ENVIRONMENT += export SOFTHSM="@SOFTHSM@"; \
306        export SOFTHSM_MAJOR_VERSION="@SOFTHSM_MAJOR_VERSION@"; \
307        export SOFTHSM_LIB="@SOFTHSM_LIB@";
308endif
309
310if ENABLE_OCSP_TEST
311AM_TESTS_ENVIRONMENT += export OPENSSL="@OPENSSL@"; \
312        export OCSP_PORT="$(OCSP_PORT)";
313endif
314
315if ENABLE_NETNS
316AM_TESTS_ENVIRONMENT += export UNSHARE="@UNSHARE@"; \
317        export USE_TEST_NAMESPACE=1;
318endif
319# Without flock tests must not run in parallel, and PID files are used
320# to prevent conflicts between server instances. Otherwise set lock
321# files for flock.
322if DISABLE_FLOCK
323AM_TESTS_ENVIRONMENT += export TEST_LOCK="apache2.pid"; \
324        export BACKEND_LOCK="backend.pid"; \
325        export OCSP_LOCK="ocsp.pid";
326.NOTPARALLEL:
327else
328AM_TESTS_ENVIRONMENT += export FLOCK="@FLOCK@"; \
329        export TEST_LOCK="$(test_lockfile)"; \
330        export BACKEND_LOCK="$(backend_lockfile)"; \
331        export OCSP_LOCK="$(ocsp_lockfile)";
332endif
333
334# Echo AM_TESTS_ENVIRONMENT. This can be useful for debugging, e.g. if
335# you want to manually run an Apache instance with Valgrind using the
336# same configuration as a test case.
337show-test-env: export TEST_ENV=$(AM_TESTS_ENVIRONMENT)
338show-test-env:
339        @echo "$${TEST_ENV}"
340
341# Build the test suite README as HTML if pandoc is available.
342if USE_PANDOC
343noinst_DATA = README.html
344MOSTLYCLEANFILES += $(noinst_DATA)
345%.html: %.md $(srcdir)/../doc/style.css
346        $(PANDOC) --css $(filter %.css,$^) --metadata pagetitle="$(<)" --self-contained -f markdown -o $@ $<
347endif
Note: See TracBrowser for help on using the repository browser.