source: mod_gnutls/test/Makefile.am @ f674424

debian/masterproxy-ticket
Last change on this file since f674424 was f674424, checked in by Fiona Klute <fiona.klute@…>, 23 months ago

First prototype of proxy ALPN support

The current code assumes that the "proxy-request-alpn-protos"
connection note will always contain exactly one protocol if present,
which is what mod_proxy_http2 does.

  • Property mode set to 100644
File size: 10.6 KB
Line 
1SUBDIRS = tests
2
3dist_check_SCRIPTS = test-00_basic.bash \
4        test-01_serverwide_priorities.bash \
5        test-02_cache_in_vhost.bash \
6        test-03_cachetimeout_in_vhost.bash \
7        test-04_basic_nosni.bash \
8        test-05_mismatched-priorities.bash \
9        test-06_verify_sni_a.bash \
10        test-07_verify_sni_b.bash \
11        test-08_verify_no_sni_fallback_to_first_vhost.bash \
12        test-09_verify_no_sni_fails_with_wrong_order.bash \
13        test-10_basic_client_verification.bash \
14        test-11_basic_client_verification_fail.bash \
15        test-12_cgi_variables.bash \
16        test-13_cgi_variables_no_client_cert.bash \
17        test-14_resume_session.bash
18if USE_MSVA
19dist_check_SCRIPTS += test-15_basic_msva.bash
20endif
21dist_check_SCRIPTS += test-16_view-status.bash \
22        test-17_cgi_vars_large_cert.bash \
23        test-18_client_verification_wrong_cert.bash \
24        test-19_TLS_reverse_proxy.bash \
25        test-20_TLS_reverse_proxy_client_auth.bash \
26        test-21_TLS_reverse_proxy_wrong_cert.bash \
27        test-22_TLS_reverse_proxy_crl_revoke.bash \
28        test-23_TLS_reverse_proxy_mismatched_priorities.bash \
29        test-24_pkcs11_cert.bash \
30        test-25_Disable_TLS_1.0.bash \
31        test-26_redirect_HTTP_to_HTTPS.bash \
32        test-27_OCSP_server.bash \
33        test-28_HTTP2_support.bash \
34        test-29_force_handshake_vhost.bash \
35        test-30_ip_based_vhosts.bash \
36        test-31_vhost_SNI_serveralias_match.bash \
37        test-32_vhost_SNI_serveralias_mismatch.bash \
38        test-33_vhost_SNI_serveralias_missinghost.bash \
39        test-34_TLS_reverse_proxy_h2.bash
40
41TEST_EXTENSIONS = .bash
42TESTS = $(dist_check_SCRIPTS)
43
44check_PROGRAMS = pgpcrc
45pgpcrc_SOURCES = pgpcrc.c
46
47# build OCSP database tool
48if ENABLE_OCSP_TEST
49check_PROGRAMS += gen_ocsp_index
50gen_ocsp_index_SOURCES = gen_ocsp_index.c cert_helper.c
51gen_ocsp_index_CFLAGS = $(LIBGNUTLS_CFLAGS)
52gen_ocsp_index_LDFLAGS = $(LIBGNUTLS_LIBS)
53noinst_HEADERS = cert_helper.h
54endif
55
56# Identities in the miniature CA, server, and client environment for
57# the test suite
58shared_identities = authority client
59pgp_identities = $(shared_identities)
60x509_only_identities = server rogueca imposter rogueclient
61if ENABLE_OCSP_TEST
62x509_only_identities += ocsp-responder
63endif
64x509_identities = $(shared_identities) $(x509_only_identities)
65identities = $(shared_identities) $(x509_only_identities)
66# Append strings after ":=" to each identity to generate a list of
67# necessary files
68pgp_tokens = $(pgp_identities:=/cert.pgp) \
69        $(pgp_identities:=/secret.pgp)
70x509_keys = $(x509_identities:=/secret.key)
71x509_certs = $(x509_identities:=/x509.pem)
72x509_tokens = $(x509_certs) $(x509_keys)
73tokens = $(x509_tokens) $(pgp_tokens)
74
75if !DISABLE_FLOCK
76# flock command for write access to the authority keyring
77GPG_FLOCK = @FLOCK@ authority/lock
78endif
79
80include $(srcdir)/test_ca.mk
81
82# Test cases trying to create keys and certificates in parallel causes
83# race conditions. Ensure that all keys and certificates are generated
84# before tests get to run.
85#
86# NOTE: Once the support files have been generated, test cases can be
87# run with multiple jobs, but real parallelization would require
88# dynamic port assignments. At the moment, lock files ensure that only
89# one Apache instance (possibly plus a proxy back end instance) is
90# running at any time, so test cases actually have to wait for each
91# other - just not in any particular order.
92check_DATA = $(tokens) server/crl.pem
93
94MOSTLYCLEANFILES = cache/* logs/* outputs/* server/crl.pem
95
96cert_templates = authority.template.in client.template.in \
97        imposter.template.in ocsp-responder.template rogueca.template \
98        rogueclient.template.in server.template.in
99generated_templates = authority.template client.template \
100        imposter.template rogueclient.template server.template
101
102# Delete X.509 private keys on full clean. Note that unless you need
103# to generate fresh keys, the "mostlyclean" target should be
104# sufficient (see below).
105CLEANFILES = $(x509_keys)
106
107# Delete X.509 certificates and generated templates on "mostlyclean"
108# target. Certificates can be rebuilt without generating new key
109# pairs, and regenerating them makes it possible to change identities
110# (e.g. host names) without wasting time on new keys (which would
111# happen after "clean").
112MOSTLYCLEANFILES += */x509.pem $(generated_templates) *.uid
113
114
115# Delete PGP keyrings on "mostlyclean" target. They are created from
116# the X.509 private keys and certificates with an expiration time of
117# one day, so regenerating them is both fast and frequently
118# necessary.
119MOSTLYCLEANFILES += */*.pgp */*.pgp.raw */*.gpg */*.gpg~ */gpg.conf \
120        authority/lock */*.kbx */*.kbx~ */S.gpg-agent */private-keys-v1.d/* \
121        authority/tofu.db
122# GnuPG random pool, no need to regenerate on every build
123CLEANFILES += authority/random_seed
124
125# GnuPG 2 starts gpg-agent processes per GNUPGHOME (one for every PGP
126# identity) while creating the PGP certificates. This target is called
127# by both "check-local" and "mostlyclean-local": The former because
128# agent processes are started while preparing for "check" and are no
129# longer needed afterwards, the latter to make sure they are gone
130# along with their certificates.
131stop-gnupg-agent:
132        for id in $(pgp_identities) $(msva_home); do \
133                GNUPGHOME=$$id/ gpgconf --kill gpg-agent || true; \
134        done
135
136check-local: stop-gnupg-agent
137
138# Delete lock files for test servers on "mostlyclean" target.
139MOSTLYCLEANFILES += *.lock
140
141# rule to build MSVA trust database
142if USE_MSVA
143msva_home = msva.gnupghome
144check_DATA += $(msva_home)/trustdb.gpg client.uid
145MOSTLYCLEANFILES += $(msva_home)/trustdb.gpg
146$(msva_home)/trustdb.gpg: authority/minimal.pgp client/cert.pgp
147        mkdir -p -m 0700 $(dir $@)
148        GNUPGHOME=$(dir $@) gpg --import < $<
149        printf "%s:6:\n" "$$(GNUPGHOME=authority/ gpg --with-colons --list-secret-keys --fingerprint | grep ^fpr: | cut -f 10 -d :)" | GNUPGHOME=$(dir $@) gpg --import-ownertrust
150        GNUPGHOME=$(dir $@) gpg --import < client/cert.pgp
151        printf "keyserver does-not-exist.example\n" > $(msva_home)/gpg.conf
152endif
153
154if ENABLE_OCSP_TEST
155# rules to build OCSP database
156check_DATA += authority/ocsp_index.txt
157MOSTLYCLEANFILES += authority/ocsp_index.txt authority/ocsp_index.txt.attr
158authority/ocsp_index.txt: $(x509_tokens) gen_ocsp_index authority/ocsp_index.txt.attr
159        ./gen_ocsp_index server/x509.pem client/x509.pem > $@
160
161authority/ocsp_index.txt.attr: authority/secret.key
162        echo "unique_subject = no" > $@
163
164# build certificate chain file for server
165check_DATA += server/x509-chain.pem
166MOSTLYCLEANFILES += server/x509-chain.pem
167%/x509-chain.pem: %/x509.pem authority/x509.pem
168        cat $< authority/x509.pem > $@
169endif
170
171# SoftHSM tokens. Note that the SoftHSM 2 token is a directory and
172# hence has to be treated slightly differently.
173SOFTHSM_TOKEN = server/softhsm.db
174SOFTHSM2_TOKEN = server/softhsm2.db
175
176# Tokens should be cleaned whether or not the matching SoftHSM version
177# was detected on the last ./configure run.
178MOSTLYCLEANFILES += $(SOFTHSM_TOKEN)
179# included in mostlyclean-local below
180clean-softhsm2-db:
181        -rm -rf $(SOFTHSM2_TOKEN)
182
183if HAVE_SOFTHSM1
184check_DATA += $(SOFTHSM_TOKEN)
185endif HAVE_SOFTHSM1
186
187if HAVE_SOFTHSM2
188check_DATA += $(SOFTHSM2_TOKEN)
189endif HAVE_SOFTHSM2
190
191check_DATA += make-test-dirs
192extra_dirs = logs cache outputs
193make-test-dirs:
194        mkdir -p $(extra_dirs)
195
196.PHONY: make-test-dirs clean-softhsm2-db stop-gnupg-agent
197
198
199mostlyclean-local: clean-softhsm2-db stop-gnupg-agent
200        -rmdir $(pgp_identities:=/private-keys-v1.d) || true
201if USE_MSVA
202        -rmdir $(msva_home)/private-keys-v1.d || true
203endif
204
205# Delete test data directories, and wait for test services to
206# exit. The reason for the wait is that Apache instances may take some
207# time to exit and delete their PID files. Occasionally some PID files
208# where still around during "distcheck" runs by the time the target
209# checked if the build directory was really empty after "distclean",
210# breaking the build. Delaying "clean-local" until PID files are gone
211# avoids this issue, and the timeout will expose actually unclean
212# stops.
213clean-local:
214        -rmdir $(identities) || true
215        -rmdir $(extra_dirs) || true
216if USE_MSVA
217        -rmdir $(msva_home) || true
218endif
219        wait=0; \
220        while ls *.pid && test "$$wait" -lt "@TEST_LOCK_WAIT@"; do \
221                wait=$$(($$wait + 1)); \
222                echo "waiting for test services to exit ($$wait seconds)"; \
223                sleep 1; \
224        done
225
226# Apache configuration and data files
227apache_data = base_apache.conf cgi_module.conf data/dump.cgi data/ocsp.cgi \
228        data/secret.txt data/test.txt ffdhe3072.pem mime.types \
229        proxy_mods.conf
230
231EXTRA_DIST = $(apache_data) $(cert_templates) $(shared_identities:=.uid.in) \
232        apache_service.bash common.bash runtests server-crl.template \
233        softhsm.bash
234
235# Lockfile for the main Apache process
236test_lockfile = ./test.lock
237# Lockfile for the proxy backend Apache process (if any)
238backend_lockfile = ./backend.lock
239# Lockfile for the OCSP server Apache process (if any)
240ocsp_lockfile = ./ocsp.lock
241
242# port for the main Apache server
243TEST_PORT ?= 9932
244# port for MSVA in test cases that use it
245MSVA_PORT ?= 9933
246# port for TLS proxy backend server
247BACKEND_PORT ?= 9934
248# port for the OCSP responder
249if ENABLE_OCSP_TEST
250OCSP_PORT ?= 9936
251OCSP_URI_TEMPLATE = ocsp_uri = http://$(TEST_HOST):$(OCSP_PORT)/ocsp/
252endif
253# maximum time to wait for MSVA startup (milliseconds)
254TEST_SERVICE_MAX_WAIT ?= 10000
255# wait loop time for MSVA startup (milliseconds)
256TEST_SERVICE_WAIT ?= 400
257
258AM_TESTS_ENVIRONMENT = export APACHE2=@APACHE2@; \
259        export AP_LIBEXECDIR=@AP_LIBEXECDIR@; \
260        export TEST_LOCK_WAIT="@TEST_LOCK_WAIT@"; \
261        export TEST_IP="@TEST_IP@"; \
262        export TEST_HOST="@TEST_HOST@"; \
263        export TEST_PORT="$(TEST_PORT)"; \
264        export MSVA_PORT="$(MSVA_PORT)"; \
265        export TEST_SERVICE_MAX_WAIT="$(TEST_SERVICE_MAX_WAIT)"; \
266        export TEST_SERVICE_WAIT="$(TEST_SERVICE_WAIT)"; \
267        export TEST_QUERY_TIMEOUT="@TEST_QUERY_TIMEOUT@"; \
268        export BACKEND_HOST="@TEST_HOST@"; \
269        export BACKEND_PORT="$(BACKEND_PORT)"; \
270        export HTTP_CLI="@HTTP_CLI@";
271
272if HAVE_SOFTHSM
273AM_TESTS_ENVIRONMENT += export SOFTHSM="@SOFTHSM@"; \
274        export SOFTHSM_MAJOR_VERSION="@SOFTHSM_MAJOR_VERSION@"; \
275        export SOFTHSM_LIB="@SOFTHSM_LIB@"
276endif
277
278if ENABLE_OCSP_TEST
279AM_TESTS_ENVIRONMENT += export OPENSSL="@OPENSSL@"; \
280        export OCSP_PORT="$(OCSP_PORT)";
281endif
282
283if ENABLE_NETNS
284AM_TESTS_ENVIRONMENT += export UNSHARE="@UNSHARE@"; \
285        export USE_TEST_NAMESPACE=1;
286endif
287# Without flock tests must not run in parallel, and PID files are used
288# to prevent conflicts between server instances. Otherwise set lock
289# files for flock.
290if DISABLE_FLOCK
291AM_TESTS_ENVIRONMENT += export TEST_LOCK="apache2.pid"; \
292        export BACKEND_LOCK="backend.pid"; \
293        export OCSP_LOCK="ocsp.pid";
294.NOTPARALLEL:
295else
296AM_TESTS_ENVIRONMENT += export FLOCK="@FLOCK@"; \
297        export TEST_LOCK="$(test_lockfile)"; \
298        export BACKEND_LOCK="$(backend_lockfile)"; \
299        export OCSP_LOCK="$(ocsp_lockfile)";
300endif
301
302# Echo AM_TESTS_ENVIRONMENT. This can be useful for debugging, e.g. if
303# you want to manually run an Apache instance with Valgrind using the
304# same configuration as a test case.
305show-test-env: export TEST_ENV=$(AM_TESTS_ENVIRONMENT)
306show-test-env:
307        @echo "$${TEST_ENV}"
Note: See TracBrowser for help on using the repository browser.